| Name | Technology | Category | Quantity | Specifications | Action | |
|---|---|---|---|---|---|---|
| Flange Bracket | LM6000 | Fabrication | 3 |
application: Flange, Pothead Conduit Connection, Aux. Skid, Full Enclosure |
||
| Rear Isolate Shim | AERO | Fabrication | 5 |
application: Rear Isolate location: Turbine Mount |
||
| Rear Isolate Shim Temp | AERO | Electrical Components | 9 |
SHIM TEMP: REAR ISOLATE APPLICATION: TURB MT |
||
| 3,2X20 Split Pin | AERO | Hardware | 100 |
Size: 3.2 x 20 mm |
||
| 1,6x16 mm Split Pin | AERO | Hardware | 65 |
size: 1.6 x 16 mm |
||
| Shim Fabrication Detail | TM2500 | Fabrication | 10 |
Type: Fabrication Detail Item: Shim |
||
| 1/2-13 UNC Stud | LM2500 | Hardware | 50 |
Type: Stud Size: 1/2-13 UNC Length: 3 3/4 IN Material: ASTM A193 GR. B7/B7M Coating: Zn/Al |
||
| 5/8-11 UNC Stud | AERO | Hardware | 73 |
size: 5/8-11 UNC x 5 inches grade: ASTM A193 B7/B7M finish: Zn/Al coated |
||
| M16 Metric Flat Washer | LM6000 | Hardware | 4 |
Type: Regular Size: M16 Standard: ISO 7089 Hardness: Class 200 HV Coating: Grey Zn/Al ISO 10683 |
||
| 7/16 Inch Regular Flat Washer | TM2500 | Hardware | 200 |
Type: Washer Type of Washer: Flat Material: SS316 Size: 7/16 |
||
| 1 Inch Flat Washer | LM2500 | Hardware | 2 |
Type: Wide Size: 1 inch Material: ASTM F436 Type 1 Coating: Zn/Al ASTM F2833 Grade: GR.1 |
||
| M10 Serrated Washer | AERO | Hardware | 172 |
Type: Serrated Size: M10 |
||
| 3/8-16 UNC Hex Nut | LM2500 | Hardware | 22 |
size: 3/8-16 UNC material: ASTM A194 GR.8 |
||
| 1/4-20 UNC Hex Nut | AERO | Hardware | 10 |
size: 1/4-20 UNC standard: ASTM A194 Gr.8M |
||
| 1/2-20 UNF Hex Nut | LM6000 | Hardware | 57 |
Nut Hex: 1/2-20 UNF Material: ASTM A563 GR. DH Coating: Zn/Al ASTM F2833, GR.1 |
||
| 3/4-10 UNC Hex Bolt | LM6000 | Hardware | 8 |
size: 3/4-10 UNC x 2 3/4 in type: ASTM A325 Type 1 coating: Grey Zn/Al |
||
| 5/8-11 UNC Hex Bolt | LM6000 | Hardware | 18 |
Thread: 5/8-11 UNC Length: 1 1/4 inch Material: ASTM A325 Type 1 Coating: Grey Zn/Al ASTM F3125 |
||
| M12 x 35mm Metric Hex Bolt | LM2500 | Hardware | 84 |
Type: Bolt Size: M12 Length: 35 MM Material: Metric Class: 8.8 Finish: Grey Zn/Al |
||
| M10 Metric Hex Bolt | LM6000 | Hardware | 8 |
Size: M10 x 30 mm Standard: ISO 898-1 Class 8.8 Finish: Grey Zn/Al ISO 10683 |
||
| 1/4-20 UNC Hex Bolt | LM6000 | Hardware | 4 |
size: 1/4-20 UNC x 1/2 IN material: ASTM A354 GR. BD coating: Grey Zn/Al ISO 10683 |