type: bladder accumulator, capacity: 1 gallon, port: 8 in SAE, pressure rating: 4786 psi, operating temperature: -23 to 150 °C, certifications: ASME, CE, AS1210, CRN, application: turbine skid

type: screw, size: 1/4-20, length: 1.5 in, feature: self fastening

type: test match, voltage range: 3–24 VDC, current range: 5 mA–1 A, resistance range: 1.4–2 ohms, application: aerosol generators

type: pressure regulator, material: stainless steel, pressure range: 600–1800 psi, flow range: 10–60 GPM, connection: 1 x 1-1/4 in, set pressure: 1125 psig, feature: locknut adjustment

type: relief valve, inlet connection: 1/2 in MNPT

type: flow meter assembly, calibration fluid: water, flow range: 2–75 GPM, size: 1 in, pressure class: 600 lb RF, bearing material: hard carbon composite, riser connection: 3/4 in MNPT, communication protocol: HRT1, mounting: remote transmitter, approvals: ATEX, UL, FM, CSA, PED-SEP

type: temperature sensor, sensor type: RTD, element: dual element, mounting: spring loaded, thermowell material: 316 stainless steel, thermowell length: 2.5 in, process connection: 3/4-14 ANPT, approvals: ATEX, cULus

type: pressure transmitter, measurement type: gauge, range: 0–200 psi, process connection: 1/4 in-18 NPT male, conduit connection: 1/2 in-14 NPT male, electrical connection: jacket cable, output signal: 4-20 mA, approvals: cCSAus, ATEX, IECEx, protection: explosion proof / flameproof

type: PLC CPU module, system: PACSystems RX3i, processor speed: 1 GHz, memory: 64 MB

type: pressure control valve, actuator: high pressure, end connection: 150 RF, spring range: 25–40 psig, body material: WCC steel, trim type: linear cage, max pressure: 245 psig, temperature range: -20 to 180 F

type: gas detector, gas type: combustible, model: UD10, includes: partition kit, certifications: CSA, FM, ATEX

type: pressure transmitter, measurement type: gauge, range: 0–2000 psi, process connection: 1/4 in-18 NPT male, conduit connection: 1/2 in-14 NPT male, electrical connection: jacket cable, output signal: 4-20 mA, protocol: HART, approvals: cCSAus, ATEX, IECEx, protection: explosion proof / flameproof

type: flame arrester, size: 2 in, connection: FNPT, housing material: 316 stainless steel, grid material: 316 stainless steel, certification: ATEX

type: temperature sensor, sensor type: platinum RTD, element: dual element, thermowell material: 316 stainless steel, process connection: 3/4-14 ANPT, conduit connection: 3/4 in, immersion length: 2 in, connection head: aluminum flat cover, approvals: ATEX, cCSAus

type: level transmitter, technology: guided wave radar

type: pressure transmitter, measurement type: gauge, range: 0–300 psi, process connection: 1/4 in-18 NPT male, conduit connection: 1/2 in-14 NPT male, electrical connection: jacket cable, output signal: 4-20 mA, protocol: HART, approvals: cCSAus, ATEX, IECEx, protection: explosion proof / flameproof

type: pressure transmitter, measurement type: gauge, range: 0–1000 psi, process connection: 1/4 in-18 NPT male, conduit connection: 1/2 in-14 NPT male, electrical connection: jacket cable, output signal: 4-20 mA, protocol: HART, approvals: cCSAus, ATEX, IECEx, protection: explosion proof / flameproof

type: filter element, application: water removal, model: RFP-2

type: level transmitter, technology: guided wave radar

type: check valve, size: 1.5 in, pressure class: 150 lb, connection: flange insert, body material: 316 stainless steel, seat material: Viton, spring material: 316 stainless steel, cracking pressure: 1.5 psig